Preliminary air pollution monitoring in San Miguel, Buenos Aires

Passive diffusion samplers were employed in San Miguel(Buenos Aires Metropolitan Area) for a preliminary airpollution monitoring. The highest loads were observedin downtown, compared with an urban background site.Total suspended particulate matter (TSPM) varied from0.257 to 0.033 mg cm^-2 month^-1; dust was examinedfor particle nature and size distribution. A similartrend was observed for nitrogen dioxide (NO₂) andTSPM spatial distribution, suggesting that traffic isthe major pollution source. Sulphur dioxide (SO₂)values were low and rather homogeneous. Levels for theinvestigated pollutants are below EPA's guide linevalues. Geographic (flat area, near to Rio de LaPlata) and climatologic factors (rainfalls andvariable wind directions) contribute to disperse pollutants.     

Application of intrawell testing of RCRA groundwater monitoring data when no upgradient well exists

A statistical quality control approachto detect changes in groundwater quality from aregulated waste unit is described. The approachapplies the combined Shewhart-CUSUM control chartmethodology for intrawell comparison of analyteconcentrations over time and does not require anupgradient well. A case study from the U.S.Department of Energy's Hanford Site is used forillustration purposes. This method is broadlyapplicable in groundwater monitoring programs wherethere is no clearly defined upgradient location, thegroundwater flow rate is exceptionally slow, or wherea high degree of spatial variability exists inparameter concentrations. This study also indicatesthat the use of the Data Quality Objectives (DQO)process can assist in designing an efficient andcost-effective groundwater monitoring plan to achievethe optimum goal of both low false positive and lowfalse negative rates (high power).     

Ambient Air Quality Monitoring Network Design for Assessing Human Health Impacts from Exposures to Airborne Contaminants

Existing methods of establishing ambientair quality monitoring networks typically evaluateonly parameters related to ambient concentrations ofthe contaminant(s) of interest such as emissionsource characteristics, atmospheric transport anddispersion, secondary reactions, depositioncharacteristics, and local topography. However,adverse health risks from exposures to airbornecontaminants are a function of the contaminant andthe anatomic and physiologic characteristics of theexposed population. Thus, ambient air qualitymonitoring networks designed for the protection ofpublic health or for epidemiological studiesevaluating adverse health impacts from exposures toambient air contaminants should account for bothcontaminant characteristics and human healthparameters. A methodology has been establishedwhich optimizes ambient air quality monitoringnetworks for assessments of adverse human healthimpacts from exposures to airborne contaminants byincorporating human health risk assessmenttechniques. The use of risk assessment techniquesas the basis for designing ambient air qualitymonitoring networks will help to target limitedfinancial and human resources to evaluate humanhealth risks from exposures to airbornecontaminants.     

evaluation of a measurement method for forest vegetation in a large-scale ecological survey

We evaluate a field method for determining species richness andcanopy cover of vascular plants for the Forest Health MonitoringProgram (FHM), an ecological survey of U.S. forests. Measurementsare taken within 12 1-m² quadrats on 1/15 ha plots in FHM.Species richness and cover are determined for four height classes(strata) within each quadrat and aggregated by stratum over the entireplot. We estimated (1) the agreement between experienced trainers andinexperienced technicians who collected the data on this survey(accuracy) and (2) the agreement among the technicians (precision) forresults on species richness and cover from 3 test plots at 3 timeintervals. The methods appear to be highly precise, although somediscrepancies with the values obtained by the trainers were found.Trainers found significantly more species in the ground stratum (0–0.6 m) and measured significantly more cover in the uppermost stratum(>4.9 m). The proportion of variation due to measurement error andtemporal variability was less than 13% for species richness (all strata)and cover (all but one stratum). This indicates that the method issuitable for monitoring changes in species richness and canopy coverfor a large-scale synoptic monitoring project such as FHM.     

Forest Health Assessment and Monitoring – Issues for Consideration

Part of this paper has been prepared for the lecture Forest Health Assessment-Criteria,Methods and Problems given by the author at the UIMPuniversity course Sanidad Forestal en el Bosques Mediterraneos yTemplados. Implicacion de la Contaminacion Atmosferica y del Cambio Global, held in Valencia, Spain, October, 1995. Assessment and monitoring of forest health representsa key point for environmental policy and for the management ofenvironmental resources. With the renewed interest in assessment andmonitoring of forest health generated by the suspected occurrence ofa widespread forest decline in Europe and North America, manyactivities have been undertaken: however, some questions should beconsidered and clarified when attempting to estimate forest health.Particularly, the objective(s) of the assessment and monitoringprogram should be carefully identified. Identification of a program‘stask has a number of implications and consequences: it implies adefinition of what concept of forest health (forest ecosystem health,forest health or forest trees health?) is assumed, what will be thetarget entity to be monitored, and therefore the identification of therelevant assessment questions and assessment endpoints.Consequences concern the definition of the spatial scale (frominternational to landscape and plot scale monitoring) and ecologicalcoverage (from single species population to population ofecosystems) of the program, which can have a considerable influenceon the choice of the proper sampling strategy and tactic, as well ason the most suitable methods, indicators and indices to be used.Although much of the work in the field of forest health and airpollution has concentrated on surveys on crown transparency anddiscoloration, there is an entire range of methods, indicators andindices developed to assess the health status of forests. The decisionas to which ones should be used will depend on the aim of theprogram and on economic and practical considerations. A furtherconsideration concerns the time span of the program, but anydecision in this field is subject to many limitations due to difficultiesin predicting future monitoring needs. All these points should becarefully considered and implemented according to a rigorousQuality Assurance procedure since any decision will influence futurework for many years.     

亚甲蓝分光光度法测定饮用水中阴离子表面活性剂的方法讨论

用10ml氯仿萃取离子缔合物一次,洗涤一次,不稀释。它与国标方法的线性回归无显著性差异,此方案测定样品的准确度En为0·34,小于1,结果令人满意,测量不确定度是除国标方法外最低的方案。因此它具有低污染、操作简单的特点,并可用于常规检测饮用水中的LAS。     

空气质量自动监测校准系统中存在的问题及解决办法

针对目前国内环境空气质量自动监测(干法)校准系统中存在的一些问题,提出相应的解决办法。     

建立锡山市跨行政区水域边界监控点的必要性和可行性

分析了建立锡山市跨行政区水域边界监控点的必要和可行性，并阐述了建立锡山市排污总量控制体系的重要性，以便提高整个区域的水环境质量。     

酸性法测定高锰酸盐指数加热时间的选择

酸性法测定高锰酸盐指数，会因实验条件的差异产生不同的结果。对不同加热时间，加热方式等因素进行了试验，结果表明加热时间以水浴加热沸腾３０ｍｉｎ或电炉直接加热８ｍｉｎ为宜。     

车载巡测在区域射频电磁环境质量监测与表征中的应用分析

对北京中央电视塔周围25 km²区域电磁环境质量分别进行了射频的网格法手工监测和车载巡测自动监测，通过SPSS软件等对两种监测方法获取的数据进行了统计对比分析，发现两组数据在总体水平及数值分布特征上较为接近，因此车载巡测监测可以替代网格法监测。以车载巡测数据为基础，绘制了实测数据的道路电磁地图，利用插值法绘制了区域电磁地图，对区域电磁环境质量进行了直观表征。从回应公众关注和城市电磁规划出发，建议今后可利用车载巡测监测加强时域和频域的监测。